Tio2 and Nickel Coatings on Resistance Welding Electodrs to exetended Life Using Chemical Vapour Desposition Process

DOI

https://www.doi.org/10.59256/ijire.20230403100

Published In

Volume 4, Issue 3 (2023)

Published Online

May-June 2023

Pages

362-366

Article Type

Research Article

Check for updates

Abstract: TiO2/Ni coating has been deposited onto the electrodes by chemical vapour deposition to improve electrode life during resistance welding of Zn- coated steels. However, welding results revealed that molten Zn penetrates into coating through the cracks and then reacts with substrate copper alloy to form brasses. In the present work, laser treatment was performed on the TiO2/Ni coated electrodes to eliminate cracks formed in the as-deposited TiO2/Ni coating. In addition, a chemical vapour deposition of Ni, TiO2/Ni and Ni has also been carried out to improve coating quality. On the other hand, a Ti coating was also investigated. Those coatings were characterized by electro-microscopy, energy- dispersive X-ray analysis, X-ray diffraction and micro-hardness tests. The results showed that cracks within the as-deposited TiO2/Ni coating could be eliminated with the use of laser treatment and chemical vapour deposition process. However, softening of copper substrate after laser treatment was a problem that restricted welding performance. Welding tests showed that the multi-layer TiO2/Ni coating acted as a better barrier to decrease alloying between the copper alloy and molten Zn as well as pitting (erosion) of electrode. The TiO2 coating demonstrates its potential application on the electrode to further improve the electrode’s life