The Effect of Shape Memory Alloy in Composite Beam

DOI

No DOI

Published In

Volume 2, Issue 4 (2021)

Published Online

July-August 2021

Pages

11-12

Article Type

Research Article

Check for updates

No DOI available for cross-reference

Abstract: This study deals with the static examination of the effect of shape memory alloy using finite element analysis oneness software. In this paper, a fundamentally supported carbon/epoxy beam is considered. A point stack of 10 KN is applied at the to player of the carbon/epoxy carbon/ epoxy beam. The boundary condition is same for with and without SMA wire. this researchworkinvolvesanalysisofthe1000mmlengthcarbon/epoxycarbon/epoxy shaft. the shape memory mix wire is used at the top surface over the unprejudiced turn of the carbon/epoxy point of support. The shape memory compound wire which is 10% by volume part of the whole carbon/epoxy beam. After performing analysis we compare both the result with SMA and without SMA wire. In this analysis we compare the maximum deformation, Equivalent(von-misses) nervousness. From the above result, we have seen the effect of shape memory compound wire on the carbon/epoxy beam. All the procedure which is used to assessment the carbon/epoxy beam is controlled by ansyssoftware.