Gas Leak Alerting System Using Arduino UNO

DOI

https://www.doi.org/10.59256/ijire.20250603001

Published In

Volume 6, Issue 3 (2025)

Published Online

May-June 2025

Pages

01-04

Article Type

Original Article

Check for updates

The major goal of this research is to detect gas leaks using sensors. These sensors are commonly used to detect the presence of hazardous gases. When there is gas present, the buzzer emits an audible signal. Many incidents occur on a daily basis, such as explosions caused by gas leaks. If gas leaks are not caught in a timely manner, they can cause significant damage. However, we can now detect gas leaks using gas sensors, and gas leakage detectors, such as Arduino-based systems, may be put in houses, hotels, and LPG gas storage locations. This gas detector device detects gas leaks. If the gas in the air is normal, the LED on the main circuit will light up green, indicating that everything is fine; however, if the sensor detects gas, the red LED will glow, indicating that the power is turned off. So, this intelligent gas detector project will aid in detecting gas leaks in the nearby locations