Electrical Machines Research Journal | IJIRE Engineering
Category: Blog
Date: 2026-09-24
⚙️ Electrical Machines Research Journal – IJIRE
The International Journal of Innovative Research in Engineering (IJIRE) (e-ISSN: 2582-8746) is a bi-monthly, peer-reviewed, open-access international journal publishing research across Science, Engineering, and Technology. Researchers working on electrical machines, drives, power systems, power electronics, renewable energy, automation, and related engineering technologies can submit research within the journal's multidisciplinary scope.
As a multidisciplinary online research publication platform, IJIRE provides a venue for academicians, engineers, scholars, students, educationists, and industry professionals to share innovative ideas and research findings. An electrical machines research journal can cover electric motors, generators, drives, machine design, control techniques, energy conversion, performance analysis, fault diagnosis, and applications in modern power and renewable energy systems.
⚙️ Scope of the Electrical Machines Research Journal
The journal provides an academic medium for advancing and disseminating research results that support high-level learning, teaching, and research in engineering and technology. The electrical machines research journal scope connects electrical machine research with power electronics, renewable energy, automation, control systems, smart grids, electric vehicles, and emerging technologies.
IJIRE follows an open-access, peer-reviewed multidisciplinary publishing model. Research articles made available through open access can be accessed online, supporting the dissemination of engineering research among researchers, academicians, students, and industry professionals.
🔧 Electrical Machines Research Areas
- ⚡ Electric Motors: Induction motors, synchronous motors, permanent-magnet machines, switched reluctance motors, and advanced motor technologies.
- 🔋 Electrical Generators: Generator design, performance evaluation, excitation systems, and renewable-energy generation applications.
- ⚙️ Machine Design: Electromagnetic design, thermal analysis, optimization, modelling, simulation, and efficiency improvement.
- 🎛️ Motor Drives: Variable-speed drives, drive control, converter-fed machines, and high-performance drive systems.
- 🧠 Machine Control: Vector control, direct torque control, sensorless control, intelligent control, and adaptive techniques.
- 🔍 Fault Diagnosis: Condition monitoring, fault detection, predictive maintenance, vibration analysis, and machine health assessment.
- 🌡️ Thermal Management: Thermal modelling, cooling systems, heat transfer, and temperature management in electrical machines.
- 📈 Performance Analysis: Efficiency, losses, torque characteristics, transient behaviour, reliability, and experimental validation.
🌱 Renewable Energy & Electrical Machines
Electrical machines are central to many renewable energy conversion systems. Research may investigate generators for wind-energy systems, motor-generator configurations, renewable-energy drives, machine control, power conversion, energy efficiency, and integration with modern electrical networks.
- Wind-energy conversion systems
- Permanent-magnet generators
- Solar-energy conversion and motor-drive applications
- Hybrid renewable energy systems
- Energy-efficient electrical machines
- Grid-connected generator systems
- Energy storage and machine-drive integration
- Electric vehicle traction motors
🔌 Power Electronics, Drives & Automation
- 🔋 Power Converters: Inverters, rectifiers, DC-DC converters, AC-DC systems, and machine-drive converters.
- 🎛️ Drive Systems: AC drives, DC drives, servo systems, variable-frequency drives, and advanced motor-control architectures.
- 🤖 Automation: PLC, SCADA, industrial automation, process control, and automated machine applications.
- 🧮 Optimization: Machine parameter optimization, energy-efficiency improvement, intelligent algorithms, and design optimization.
- 🚗 Electric Vehicles: Traction motors, EV drive systems, regenerative braking, motor control, and charging-related technologies.
🧠 AI, Machine Learning & Smart Machine Research
Emerging electrical machine research increasingly combines traditional electrical engineering with artificial intelligence, machine learning, data analytics, and intelligent automation. Potential research areas include AI-assisted machine design, predictive maintenance, fault classification, condition monitoring, performance prediction, and intelligent control.
💻 Computer Science & Electrical Machines Research
Modern electrical machine research can intersect with computer science, artificial intelligence, data science, embedded systems, IoT, and cloud-based monitoring. Researchers may develop computational models for machine performance, intelligent fault diagnosis, predictive maintenance, digital monitoring, and data-driven optimization.
Interdisciplinary studies connecting computer science and electrical engineering can contribute to intelligent motor control, machine-health monitoring, sensor-based diagnostics, automated testing, and predictive analytics for industrial applications.
🚀 Why Consider IJIRE for Electrical Machines Research?
🔍 Rapid Peer Review
According to the supplied journal information, IJIRE follows a structured peer-review process intended to provide decisions within a short timeframe. Actual review duration may vary according to editorial assessment, reviewer availability, manuscript quality, and revisions.
🌐 Open Access Policy
Open-access publication allows published research to be accessed online without a subscription barrier, supporting wider dissemination among researchers, academicians, students, and engineering professionals.
⚡ Fast Publication Workflow
IJIRE provides an online editorial workflow covering manuscript submission, editorial communication, peer review, decision processing, and publication-related documents. Authors searching for fast publication should review the current journal policies and processing requirements because actual timelines can vary.
🛡️ Plagiarism Protection
Manuscripts are subject to plagiarism or similarity screening as part of the academic-integrity workflow. Authors should submit original work and appropriately acknowledge previous research.
📚 Publication Ethics
The supplied journal information states that IJIRE follows publication-ethics practices aligned with COPE guidance. Authors should consult the journal's current ethical and editorial policies before submitting a manuscript.
🔎 Indexing & Abstracting
The following services are listed in the supplied IJIRE information. Authors should independently verify current indexing or abstracting status directly with each service because database coverage and journal listings can change.
⚡ Fast & Rapid Publication Process
Authors interested in rapid publication can submit manuscripts through the IJIRE editorial management system. The following timeline reflects the supplied journal information and should be treated as a stated process rather than a guarantee of processing time.
- 📤 Submit Online: 24/7 manuscript submission through the editorial management system.
- 📩 Initial Response: The supplied information states that an acknowledgment is provided within 12 hours.
- 🔬 Expert Review: The stated peer-review timeframe is 2–7 days, subject to editorial and reviewer requirements.
- 📋 Decision Notification: The supplied information indicates a stated decision timeframe of 3–7 days.
- 📄 Publication & Certificate: PDF access and digital certificate availability are provided according to the supplied journal information.
💰 Low Cost Article Processing Charges
IJIRE follows an open-access publication model. According to the supplied information, an article processing fee is payable after manuscript acceptance. The listed charges for Case Report, Original Article, and Review Article submissions are provided below.
| Author Category | DOI Option | Listed Fee |
|---|---|---|
| Foreign Authors | With DOI | $80 USD |
| Indian Authors | Without DOI | ₹1,200 + 18% GST |
| Indian Authors | With DOI | ₹1,400 + 18% GST |
These listed charges may be relevant to authors searching for a low cost open-access publishing option. Authors should confirm current APCs, DOI availability, GST, payment terms, and any additional charges with the journal before payment.
🖥️ Advanced Editorial Management System
- 👤 Author Dashboard: Personalized access to submission history and manuscript status updates.
- 📍 Real-time Tracking: Monitor manuscript progress through different editorial stages.
- 📄 Automated Documents: Access acceptance letters and copyright-related documents through the editorial workflow.
- ⬇️ Easy Downloads: Access certificates and published research papers through the online system.
📚 UGC CARE & Google Scholar Information
Researchers searching for an electrical machines research journal may also use terms such as UGC CARE and Google Scholar. These represent different aspects of academic discovery and evaluation. UGC CARE requirements and related lists can change, so authors should verify current official information and their institution's requirements before relying on any journal status for academic purposes.
The supplied IJIRE information lists Google Scholar among its indexing and abstracting services. Authors should independently confirm current database coverage before submitting their manuscript.
📤 Submit Electrical Machines Research
Researchers working on electric motors, generators, machine design, motor drives, fault diagnosis, machine control, renewable-energy generators, electric vehicles, power electronics, or industrial automation can consider submitting relevant research to IJIRE.
Interdisciplinary research connecting electrical machines with computer science, artificial intelligence, machine learning, IoT, embedded systems, communication technologies, and data analytics is also relevant to the journal's multidisciplinary scope.
If your manuscript meets the journal's scope and submission requirements, access the online editorial management system below:
For editorial queries: [email protected]
⚙️ IJIRE – Electrical Machines Research Publication: IJIRE provides an open-access multidisciplinary platform covering electrical machines, motors, generators, drives, power electronics, renewable energy, automation, AI, IoT, and computer science. Researchers seeking an electrical machines research journal with stated low cost options, fast publication workflows, and rapid publication processing can review the journal's current policies, scope, fees, and editorial requirements before submission.
